How to maintain insulating glass equipment

The maintenance and maintenance of hollow glass equipment is to keep the hollow glass equipment in good condition during glass processing.Therefore, the daily maintenance and maintenance of hollow glass equipment is very important. First, if there is a problem in operation, we must stop production and carry out safety maintenance to avoid accidents.How does Insulating glass machine need to be maintained?What are the precautions for insulating glass machine

?

1. When filling water into the water tank and softened water device, the tap water switch should be kept on and the water should be sufficient.

2. You can adjust the water temperature controller in the electrical box to set the water temperature according to the actual situation. Generally speaking, it is set at 15-50°C. You can also add some neutral detergent appropriately to achieve the best temperature. cleaning effect.

3.The thickness of the glass after cleaning with a glass washing machine is 3-12mm. After drying, there may be a small amount of water droplets on the rear edge of the glass, which is within the normal control range.

4. After installation and adjustment of Insulating glass machine, remember to test according to the instructions, remember to test in order of instructions. If the glass breaks due to poor adjustment, it must be stopped quickly, and the broken glass must be poured out in reverse, and it must be cleaned in time to avoid scratching the hair. Brushes and transfer rollers.

5. Make sure all parts of the machine are in good contact before operation.

6. Be sure to produce safely and operate in strict accordance with the operating procedures.

                                              Horizontal glass washing machine